Bisley ToolStor Standard Duty 30 x No.3 Bin Cupboard - 1000H x 1000W - 4 x 100kg Galvanised Shelves - BIS404251W.
- Price: £547.20 - In stock
- Model: BIS404251W
Bisley ToolStor Standard Duty 30 x No.3 Bin Cupboard - BIS404251W - Overview:
Bisley Workshop presents our ToolStor standard duty 30 x no.3 bin cupboard. The BIS404251W cupboard has 4 heavy duty galvanised steel shelves, each with a load capacity of 100kg (UDL). All shelves are adjustable on a 25mm pitch within the cupboards internal vertical rail system.
The 4 shelves support a combined total of 30 x No.3 industrial plastic storage bins that are made of acid, oil and solvent proof high density Polyethylene. These open fronted bins are a simple and effective solution for organising components or small part storage. They and can be stacked on top of each other or hung on louvre panels using the moulded rear lip. The smooth thermoplastic inner walls make them easy to clean.
To aide content security of your organised small part storage, this 4 shelf bin cupboard has standard duty industrial doors. These door have reinforcing stiffeners to add further thickness and rigidity. Our patented push-to-shut paddle handle and lock is built into the door.
As part of Bisley's new range of tool storage this 1000Hmm x 1000Wmm x 350Dmm ToolStor bin cupboard can be used as a single storage unit or as part of an integrated storage solution with other ToolStor cabinets, cupboards and worktops. Its industrial design positions the cupboard as a high end professional workshop system that can be tailored internally to meet your storage requirements.
Industrial Shelving Cupboard Carcass:
This well-engineered standard duty bin cupboard has overall external dimensions of 1000Hmm x 1000Wmm x 350Dmm. The laser cut and robotically assembled carcass is made using high grade cold rolled mild steel to meet the heavy duty and industrial workplace standards. Each industrial reinforced door is hung from the steel carcass using 3 heavy duty steel hinges. Each hinge provides the door with 180 degree swing motion.
This cupboard can support a top load of 1000kg (UDL). A 25mm internal pitch system within each corner of the 1000Hmm x 1000Wmm x 350Dmm cupboard supports all internal components.
All front corners and edges on the 1000Hmm x 1000Wmm x 350Dmm carcass are fully welded then grinded down before powder coating. This creates a flush and solid appearance whilst also providing the workshop cupboard with greater strength and structural integrity. 20.3mm thick front mouldings are constructed 5mm thicker than that of competing industrial cupboards. Heavy duty side walls provide strength and protection from side on impacts and house the industrial doors.
A 1.2mm top and base panel increases the stability, whilst the reinforced base and base struts provide superior strength and structural integrity to the cupboards carcass. The BIS404251W strong reinforced base allows the cupboard to have adjustable feet (included). These are ideal for workshop installations or for when a floor is not completely level.
Paddle Handle Locking Mechanism:
Incorporated into the distinct door profile of this standard duty bin cupboard, is our patented paddle handle and spring loaded, 3 point slam bolt locking arrangement. The uniquely designed paddle handle provides an ergonomic opening and closing solution, whilst the 3 heavy duty door latches promote a "Push-to-Shut" action. These patented features allow you to open the door and push it shut with little effort required.
By replacing the traditional 3 point locking pins with slam bolt door latches, the fiddly function of lining up the pins with their relative carcass holes is no longer an issue. Subsequently the combination of the locking mechanism and the ergonomic paddle handle makes this cupboard appropriate for use under the Disability Discrimination Act 1995.
Distinct ToolStor Profile:
As part of the ToolStor range, the BIS404251W cupboard features a distinctive and attractive roll formed profile that provides the range with a recognisable identity when used as either a single storage unit or as part of an integrated storage solution. This profile brings a well-engineered and modern design to a new evolution of tool storage cupboards. The rolled formed profile has a technical function by providing a protective steel channel in which the patented locking mechanism is situated.
Textured Powder Coat Finish:
The 1000Hmm x 1000Wmm x 350Dmm workshop cupboard carcass is finished in a hard wearing RAL7035 light grey textured powder coat. This high quality Bisley finish completes the cupboards internal and external surfaces. The doors are available in Gentian blue (RAL5010), Crimson red (RAL3004), light grey (RAL7035) or Anthracite grey (RAL7016). The colour distinction between carcass, door and paddle handle creates a smart, contemporary and ergonomic appearance suitable for any workshop or industrial workspace. The choice of colours allow you to select one that best reflects your workspace or your approach to business.
Colour Lead Times:
BIS404251W.50 - Gentian Blue (RAL5010): 15 - 20 Working Days
BIS404251W.30 - Crimson Red (RAL3004): 15 - 20 Working Days
BIS404251W.75 - Light Grey (RAL7035): 15 - 20 Working Days
BIS404251W.70 - Anthracite Grey (RAL7016): 15 - 20 Working Days
|Base||Static Adjustable Feet|
|Overall Dimensions||1000H x 1000W x 350Dmm|
|Carcass Dimensions||1000H x 1000W x 350Dmm|
|Number of Shelves||4|
|Shelf Capacity U.D.L||100kg Each|
|Number of Drawers||No|
|Drawer Capacity U.D.L||No|
|Internal Drawer Dimensions||No|
|Combined Drawer Height||No|
|Rear Louvre Panels||No|
|Rear Perforated Panels||No|
|No. of Plastic Bins||30 x No.3|
|Door Lining||No Door Lining / Reinforcing Channel Only|
|Locking Mechanism||Propriatry Paddle Handle & 3 Point Latch Lock|
|Number of Keys||2|
|Delivery Time||Delivered in 15 - 20 Working Days|
No downloads currently available.
© Copyright Bisley Industrial 2018 | All Rights Reserved
Bisley Industrial Storage Ltd trading as Bisley Workshop 2018.