Bisley ToolStor 9 Drawer Stationary Tool Cabinet - 1000H x 1000W - 1 x 175mm, 3 x 125mm, 5 x 75mm Drawer Config - BIS400337W.
- Price: £1,036.92 - In stock
- Model: BIS400337W
Bisley ToolStor 9 Drawer Tool Cabinet - BIS400337W - Overview:
Bisley Workshop presents our ToolStor 9 drawer stationary tool cabinet. This 9 drawer tool cabinet is ideal for organising your hand tools, accessories and small component storage. The BIS400337W is a heavy duty stationary cabinet that forms part of our Bisley ToolStor professional tool storage range. This cabinet can be used as a single unit or as part of a high end integrated workshop system.
The BIS400337W stationary tool cabinet has 1 x 175mm, 3 x 125mm, 5 x 75mm high galvanised steel drawers. Each drawer has an 80kg UDL capacity and sits on heavy duty telescopic slides. The 19mm ball bearing slides provide 100% pull extension of 475mm, even when fully laden.
The 1 x 175mm, 3 x 125mm, 5 x 75mm high drawer configuration of this workshop cabinet, along with the full width aluminium drawer handles, enhance drawer content accessibility, ergonomics and mobility.
This stationary tool cabinet has a heavy duty constructed steel carcass with overall dimensions of 1000mm high x 1000mm wide and 550mm deep. This cabinet sits on heavy duty adjustable feet which are ideal for levelling the cabinet in installations alongside full length 40mm thick worktops.
Heavy Duty Galvanised Steel Drawers:
The 1 x 175mm, 3 x 125mm, 5 x 75mm high drawers are positioned on a 25mm pitch and mounted on telescopic 19mm ball bearing slides. Our heavy duty industrial slides allow 100% pull extension of 475mm. The slides provide a smooth, noise free opening and closing action, whilst also supporting an impressive load capacity of 80kg (UDL) per drawer. Even when fully laden the smooth drawer action is not compromised.
The 9 heavy duty drawers are constructed from industrial grade galvanised steel, from which Bisley's distinctive drawer front profile and full width anodised aluminium handles are fixed to. The anodised aluminium handles have been ergonomically designed for pulling the drawer open along any part of the handle. All fixings are hidden internally in order to retain a flush front.
Our well-engineered ToolStor drawers incorporate clever design and thorough product testing. Bisley ToolStor drawers have been proof tested to 80,000 continuous opening and closing cycles whilst fully laden with 80kg.
Stationary Tool Cabinet Carcass:
The 1000Hmm x 1000Wmm x 550Dmm tool cabinet carcass is manufactured using our advance robotic machinery. This process produces a precision made heavy duty carcass that meets the demanding industrial workplace standards.
The fully welded and reinforced cold rolled steel carcass provides the 1 x 175mm, 3 x 125mm, 5 x 75mm drawers with a strong, protective and heavy duty housing. The front mouldings are 20.3mm thick and constructed 5mm thicker than that of competing industrial cupboards. This provides drawer protection from side on impacts.
A 1.2mm top and base panel increases the stability, whilst the reinforced base and base struts provide superior strength and structural integrity to the tool cabinet's carcass. The 1000mm x 550mm strong reinforced steel base includes built in adjustable feet fitted. These are ideal for workshop installations and applying 40mm worktops to long and level cabinet bays.
The BIS400337W tool cabinet can support a top load of up to 1000kg (UDL) and can be used alongside any ToolStor cabinet or cupboard. 4 x pre-punched holes are situated at the top of the cabinet to allow a variety of 40mm worktops to be fitted.
Secure Locking Mechanism:
A combined heavy duty central locking and anti-tilt mechanism has been built into the 1000mm high x 1000mm wide cabinet. When the central locking feature is not in use, the unbeatable anti-tilt mechanism acts as a single drawer blocking system that ensures only one drawer opens at a time. This prevents the possibility of the cabinet tipping forward while in use or in transport. Each anti-tilt locking mechanism is integrated into the rear of the carcass in a centrally welded protective steel channel. The 1,3,5 drawer layout is positioned within the rear of the steel carcass and configured on a 25mm pitch.
Textured Powder Coat Finish:
The 1000Hmm x 1000Wmm x 550Dmm tool cabinet carcass is finished in a hard wearing RAL7035 light grey textured powder coat. This high quality Bisley finish completes the cabinets internal and external surfaces. The drawer fronts are available in Gentian blue (RAL5010), Crimson red (RAL3004), light grey (RAL7035) or Anthracite grey (RAL7016). The colour distinction between carcass, door and hand rail creates a smart, contemporary and ergonomic appearance suitable for any workshop or industrial workspace. The choice of colours allow you to select one that best reflects your workspace or your approach to business.
Colour Lead Times:
BIS400337W.50 - Gentian Blue (RAL5010): 15 - 20 Working Days
BIS400337W.30 - Crimson Red (RAL3004): 15 - 20 Working Days
BIS400337W.75 - Light Grey (RAL7035): 15 - 20 Working Days
BIS400337W.70 - Anthracite Grey (RAL7016): 15 - 20 Working Days
|Base||Static Adjustable Feet|
|Overall Dimensions||1000H x 1000W x 550Dmm|
|Carcass Dimensions||1000H x 1000W x 550Dmm|
|Number of Drawers||9|
|Drawer Config:||1 x 175mm, 3 x 125mm, 5 x 75mm|
|Drawer Capacity U.D.L||80kg Each|
|Internal Drawer Dimensions||896W x 465Dmm|
|Combined Drawer Height||925mm|
|Locking Mechanism||Combined Anti-Tilt & Central Locking System|
|Number of Keys||2|
|Delivery Time||Delivered in 15 - 20 Working Days|
© Copyright Bisley Industrial 2020 | All Rights Reserved
Bisley Industrial Storage Ltd trading as Bisley Workshop 2020.