Bisley ToolStor 7 Drawer Tool Chest - 1150H x 1000W - 2 x 175mm, 4 x 125mm, 1 x 75mm Drawer Config - BIS600347W.
- Price: £1,072.47 - In stock
- Model: BIS600347W
Bisley ToolStor 7 Drawer Tool Chest - BIS600347W - Overview:
Bisley Workshop presents our ToolStor 7 drawer tool chest. The BIS600347W is a heavy duty tool chest that forms part of our Bisley ToolStor professional tool storage range. This mobile tool cabinet is the ideal storage unit for organising your hand tools and part components. As with all Bisley ToolStor products, This mobile tool cabinet is ideal for industries in manufacturing, engineering, aerospace/aviation, marine and automotive, motorsport.
The BIS600347W tool chest has 2 x 175mm, 4 x 125mm, 1 x 75mm high galvanised steel drawers. Each of the 7 heavy duty drawers has an an 80kg UDL capacity and mounted on a pair of heavy duty telescopic slides that support 100% pull extension even when fully laden.
The cabinet has overall dimensions of 1150mm high x 1000mm wide x 550mm deep and includes a wide aluminium push handle for additional control while turning. The reinforced base of the cabinet sits on top of 4 x 150mm high heavy duty rubber tyre castors. Each castor has a 120kg capacity. The 2 braked and 2 swivel castors can have dual settings by using the supplied brackets. These allow you to have 4 full swivel castors in order to move around your workspace freely or in tight spaces.
The 2 x 175mm, 4 x 125mm, 1 x 75mm high drawer configuration of this workshop cabinet, along with the full width aluminium drawer handles, enhance drawer content accessibility, ergonomics and mobility. The BIS600347W tool chest comes fitted with a high grade slip resistant Nitrile rubber worktop lining contained within four side steel tray top. The Nitrile rubber top has a high oil resistance and also prevents items from accidentally rolling off while the tool chest is in motion. Butyl mats for use with Skydrol aviation fluid and more corrosive day-to-day hydraulic fluids are also available on request.
Heavy Duty Galvanised Steel Drawers:
The 2 x 175mm, 4 x 125mm, 1 x 75mm high drawers are positioned on a 25mm pitch and mounted on telescopic 19mm ball bearing slides. Our heavy duty industrial slides allow 100% pull extension of 475mm. The slides provide a smooth, noise free opening and closing action, whilst also supporting an impressive load capacity of 80kg (UDL) per drawer. Even when fully laden the smooth drawer action is not compromised.
The 7 heavy duty drawers are constructed from industrial grade galvanised steel, from which Bisley's distinctive drawer front profile and full width anodised aluminium handles are fixed to. The anodised aluminium handles have been ergonomically designed for pulling the drawer open along any part of the handle. All fixings are hidden internally in order to retain a flush front.
Our well-engineered ToolStor drawers incorporate clever design and thorough product testing. Bisley ToolStor drawers have been proof tested to 80,000 continuous opening and closing cycles whilst fully laden with 80kg.
tool chest Carcass:
The 1000Hmm x 1000Wmm x 550Dmm carcass has been manufactured using Bisley's advance robotic machinery. The result is a heavy duty and precision made tool chest that meets industrial standards. This fully welded and reinforced cold rolled steel carcass provides the 2 x 175mm, 4 x 125mm, 1 x 75mm drawer configuration with a strong, protective and heavy duty housing in which they can to be integrated into. The reinforced steel carcass construction can support a top load capacity of 1000kg (UDL).
A 1.2mm top and base panel increases the stability, whilst reinforced mobile-ready base struts give the carcass advanced structural integrity and house the 4 x 120kg capacity castors (included).
The 20.3mm thicker dressed front moulding are manufactured 5mm thicker than many competing industrial products. This provides the cabinet's front and sides with more structural integrity and stability, whilst also providing the drawers with overall protection from front and side on impacts. The front moulding corners and edges on the 1000Hmm x 1000Wmm x 550Dmm carcass are fully welded and grinded down before painting. This creates a flush and solid appearance that is both attractive and much stronger than folded steel joints.
A combined heavy duty central locking and anti-tilt mechanism has been built into the 1150mm high x 1000mm wide cabinet. When the central locking feature is not in use, the unbeatable anti-tilt mechanism acts as a single drawer blocking system that ensures only one drawer opens at a time. This prevents the possibility of the cabinet tipping forward while in use or in transport. Each anti-tilt locking mechanism is integrated into the rear of the carcass in a centrally welded protective steel channel. The 2,4,1 drawer layout is positioned within the rear of the steel carcass and configured on a 25mm pitch.
Heavy Duty Castors:
This 7 drawer tool chest includes four 150mm high, heavy duty steel castors with solid Nitrile rubber tyres. They are the ideal type of castor when a strong and resilient tread is required in an industrial environment.
Two of the four castors incorporate a traditional pedal brake into the full 360 degree swivel motion, thereby not compromising either the cabinet's mobility or stability. Each castor has an individual load capacity of 120kg. The corrosive resistant and solid pressed steel construction makes our castors ideal for heavy dynamic loads, towing and when shock loading is an issue.
Each castor is securely fitted to the reinforced base struts through a thick steel thread that provides a very strong fixing. Locking brackets allow this cabinet to switch between four full swivel castors or two fixed and two full swivel castors. This gives you the ability to move the cabinet in tight and enclosed spaces where needed.
Epoxy Powder Coat Colours:
The 1000Hmm x 1000Wmm x 550Dmm tool cabinet carcass is finished in a hard wearing RAL7035 light grey textured powder coat. This high quality Bisley finish completes the cabinets internal and external surfaces. The drawer fronts are available in Gentian blue (RAL5010), Crimson red (RAL3004), light grey (RAL7035) or Anthracite grey (RAL7016). The colour distinction between carcass, door and hand rail creates a smart, contemporary and ergonomic appearance suitable for any workshop or industrial workspace. The choice of colours allow you to select one that best reflects your workspace or your approach to business.
Colour Lead Times:
BIS600347W.50 - Gentian Blue (RAL5010): 15 - 20 Working Days
BIS600347W.30 - Crimson Red (RAL3004): 15 - 20 Working Days
BIS600347W.75 - Light Grey (RAL7035): 15 - 20 Working Days
BIS600347W.70 - Anthracite Grey (RAL7016): 15 - 20 Working Days
|Overall Dimensions||1150H x 1000W x 550Dmm|
|With Handle & Tray Top||1165H x 1070W x 550Dmm|
|Carcass Dimensions||1000H x 1000W x 550Dmm|
|Number of Drawers||7|
|Drawer Config:||2 x 175mm, 4 x 125mm, 1 x 75mm|
|Drawer Capacity U.D.L||80kg Each|
|Internal Drawer Dimensions||896W x 465Dmm|
|Combined Drawer Height||925mm|
|Castors||150mm High with Dual Settings - 4 Swivel or 2 Fixed & 2 Swivel|
|Castor Load Capacity||120kg Each|
|Locking Mechanism||Combined Anti-Tilt & Central Locking System|
|Worktop||4 Sided Steel Tray Top & Rubber Mat|
|Number of Keys||2|
|Delivery Time||Delivered in 15 - 20 Working Days|
© Copyright Bisley Industrial 2019 | All Rights Reserved
Bisley Industrial Storage Ltd trading as Bisley Workshop 2019.