Bisley ToolStor 11 Drawer Mini Workshop Cupboard - 2000H x 750W - 1 x 175mm, 10 x 75mm Drawer Config - BIS405201W.
- Price: £1,580.63 - In stock
- Model: BIS405201W
Bisley ToolStor 11 Drawer Mini Workshop Cupboard - BIS405201W - Overview:
Bisley Workshop presents our ToolStor 11 drawer mini workshop cupboard. The BIS405201W heavy duty mini workshop cupboard combines door lined perforated tool panels with a comprehensive interior of 11 x 80kg capacity galvanised drawers, a 40mm Beech multiplex worktop and double skin rear louvre and perforated storage panels.
Mini workshop cupboards provide you the ability to carry out workshop and workbench tasks within a smaller upright storage unit , for when workspace is restricted. The perforated rear panel and perforated doors are ideal for hanging tool storage. The rear louvre panel is ideal for small part components when combined with any of our plastic storage bins (not supplied). The 11 x 80kg capacity galvanised drawers have a 1 x 175mm, 10 x 75mm configuration. A 40mm multiplex worktop with a 100kg UDL capacity comes as standard with this mini workshop cupboard. Other worktop options are available on request such as ESD, lino, galvanised or stainless steel.
The versatility of the BIS405201W mini workshop cupboard means it can be used in your workshop as a single workstation, or as part of an integrated tool storage solution with other Bisley ToolStor products. The well engineered and attractive design creates a high end professional mini workshop system that enhances user ergonomics and content security. Our patented push-to-shut paddle action door handle make its easier to close the door by simply pushing it shut.
Retrofitting internal and after market components can be done out at any point and will not compromise the cupboards structural integrity. This allows you to modify or tailor your cupboard as your workspace or individual storage requirements change. The versatility and industrial design of this BIS405201W mini workshop cupboard allows it to undertake the most demanding storage applications within the most industrial workplace environments.
Heavy Duty Ergonomic Drawers:
The 1 x 175mm, 10 x 75mm high drawers are positioned on a 25mm pitch and mounted on telescopic 19mm ball bearing slides. Our heavy duty industrial slides allow 100% pull extension of 475mm. The slides provide a smooth, noise free opening and closing action, whilst also supporting an impressive load capacity of 80kg (UDL) per drawer. Even when fully laden the smooth drawer action is not compromised.
The 11 heavy duty drawers are constructed from industrial grade galvanised steel. Each drawer features a wide central handle that promotes the drawer profile, whilst still being ergonomic and unique to the ToolStor range.
Our well-engineered ToolStor drawers incorporate clever design and thorough product testing. Bisley ToolStor drawers have been proof tested to 80,000 continuous opening and closing cycles whilst fully laden with 80kg.
Mini Workshop Cupboard Carcass:
This well-engineered 11 drawer mini workshop cupboard has overall external dimensions of 2000Hmm x 750Wmm x 550Dmm. The laser cut and robotically assembled carcass is made using high grade cold rolled mild steel to meet the heavy duty and industrial workplace standards. Each industrial reinforced door is hung from the steel carcass using 3 heavy duty steel hinges. Each hinge provides the door with 180 degree swing motion.
This cupboard can support a top load of 1000kg (UDL). A 25mm internal pitch system within each corner of the 2000Hmm x 750Wmm x 550Dmm cupboard supports all internal components.
All front corners and edges on the 2000Hmm x 750Wmm x 550Dmm carcass are fully welded then grinded down before powder coating. This creates a flush and solid appearance whilst also providing the workshop cupboard with greater strength and structural integrity. 20.3mm thick front mouldings are constructed 5mm thicker than that of competing industrial cupboards. Heavy duty side walls provide strength and protection from side on impacts and house the industrial doors.
A 1.2mm top and base panel increases the stability, whilst the reinforced base and base struts provide superior strength and structural integrity to the cupboards carcass. The BIS405201W strong reinforced base allows the cupboard to have adjustable feet (included). These are ideal for workshop installations or for when a floor is not completely level.
Paddle Handle Locking Mechanism:
Incorporated into the distinct door profile of this 11 drawer mini workshop cupboard, is our patented paddle handle and spring loaded, 3 point slam bolt locking arrangement. The uniquely designed paddle handle provides an ergonomic opening and closing solution, whilst the 3 heavy duty door latches promote a Push-to-Shut action. These patented features allow you to open the door and push it shut with little effort required.
By replacing the traditional 3 point locking pins with slam bolt door latches, the fiddly function of lining up the pins with their relative carcass holes is no longer an issue. Subsequently the combination of the locking mechanism and the ergonomic paddle handle makes this cupboard appropriate for use under the Disability Discrimination Act 1995.
Distinct ToolStor Profile:
As part of the ToolStor range, this BIS405201W cupboard features a distinctive and attractive roll formed profile that provides the range with a recognisable identity when used as either a single storage unit or as part of an integrated storage solution. This profile brings a well-engineered and modern design to a new evolution of tool storage cupboards. The rolled formed profile has a technical function by providing a protective steel channel in which the patented locking mechanism is situated.
Textured Powder Coat Finish:
The 2000Hmm x 750Wmm x 550Dmm workshop cupboard carcass is finished in a hard wearing RAL7035 light grey textured powder coat. This high quality Bisley finish completes the cupboards internal and external surfaces. The doors are available in Gentian blue (RAL5010), Crimson red (RAL3004), light grey (RAL7035) or Anthracite grey (RAL7016). The colour distinction between carcass, door and paddle handle creates a smart, contemporary and ergonomic appearance suitable for any workshop or industrial workspace. The choice of colours allow you to select one that best reflects your workspace or your approach to business.
Colour Lead Times:
BIS405201W.50 - Gentian Blue (RAL5010): 15 - 20 Working Days
BIS405201W.30 - Crimson Red (RAL3004): 15 - 20 Working Days
BIS405201W.75 - Light Grey (RAL7035): 15 - 20 Working Days
BIS405201W.70 - Anthracite Grey (RAL7016): 15 - 20 Working Days
|Base||Static Adjustable Feet|
|Overall Dimensions||2000H x 750W x 550Dmm|
|Carcass Dimensions||2000H x 750W x 550Dmm|
|Number of Shelves||0|
|Shelf Capacity U.D.L||No|
|Number of Drawers||11|
|Drawer Config:||1 x 175mm, 10 x 75mm|
|Drawer Capacity U.D.L||80kg Each|
|Internal Drawer Dimensions||646W x 465Dmm|
|Combined Drawer Height||925mm|
|Rear Louvre Panels||1|
|Rear Perforated Panels||1|
|No. of Plastic Bins||No|
|Door Lining||Reinforcing Perforated Tool Panel|
|Worktop||40mm Beech Multiplex Plywood|
|Locking Mechanism||Propriatry Paddle Handle & 3 Point Latch Lock|
|Number of Keys||2|
|Delivery Time||Delivered in 15 - 20 Working Days|
© Copyright Bisley Industrial 2019 | All Rights Reserved
Bisley Industrial Storage Ltd trading as Bisley Workshop 2019.